ZLSS-6R9G-S+

• Suspended Substrate Low Pass Filter
• Low Insertion Loss, 0.6dB Typ.
• High Rejection of 90dB Typ.
• Wider Stopband Up to 20 GHz
• Connectorized Package
• Small Size, 22.86 x 17.78 x 15.24 mm

ZLSS-4R8G-S+

• Suspended Substrate Low Pass Filter
• Low Insertion Loss, 0.5dB Typ.
• High Rejection of 90dB Typ.
• Wider Stopband Up to 20 GHz
• Connectorized Package

ZLSS-3R2G-S+

• Suspended Substrate Low Pass Filter
• Low Insertion Loss, 0.6dB Typ.
• High Rejection of 90dB Typ.
• Wider Stopband Up to 20 GHz
• Connectorized Package

ZSW4-E673+

• Coaxial Solid State SP4T RF Switch
• Ultra wideband operation, 10 MHz to 67 GHz
• High Isolation, 45 dB
• Low VSWR, 1.4:1 typ. Across Operating Band
• All-OFF State Available

ABF-8R075G+

• Surface Mount Thin-Film Bandpass Filter
• Low Passband Insertion Loss of 1.6dB Typ.
• High Rejection of 56dB Typ.
• Good Return Loss of 14dB Typ.
• Small Size, 5.59 x 8.13 x 2.03 mm

AVA-26453LN-DG+

• MMIC Die Wideband Amplifier
• Single Supply Voltage, +3V and 80 mA
• Wide Bandwidth, 26 to 45 GHz
• Low Noise Figure, Typ. 2.9 dB at 35 GHz
• Output IP3, Typ. +19.2 dBm at 35 GHz

CBP4-1875Q+

• Surface Mount Ceramic Resonator Bandpass Filter
• High rejection, 60dB typ.
• Narrow band and fast roll-off
• Good insertion loss, 2.5dB typ.

K2-HAT-A+

• Fixed Attenuators Kit
• One unit each of 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10 dB precision attenuators
• Input power up to 2W Max.
• Excellent VSWR, 1.20:1 to 1.35:1 typ.
• Excellent flatness, 0.20 to 0.30 dB typ.

K1-HAT-A+

• Fixed Attenuators Kit
• One unit each of 3, 6, 10, 20 and 30 dB precision attenuators
• Input power up to 2W Max.
• Excellent VSWR,1.20:1 to 1.60:1 typ.
• Excellent flatness, 0.20 to 0.60 dB typ.

BW-VF20-1W54+

• Coaxial mmWave Fixed Attenuator
• DC to 50 GHz
• 2.4mm Female to Female Connectors
• Excellent VSWR, 1.17 typ.
• Passivated stainless steel connectors
• 1W Power Handling

ZVA-02653GX+

• Coaxial Wideband Amplifier
• High gain 21 dB typ. over the entire operating band
• Good gain flatness, ±3.0 dB typ. up to 60 GHz
• +18 dBm Psat typ
• Wide operating DC voltage, +10 to +15 V
• DC protected against over-voltage, reverse-voltage conditions

ZVA-02653G+

• Coaxial Wideband Amplifier
• High gain 21 dB typ. over the entire operating band
• Good gain flatness, ±3.0 dB typ. up to 60 GHz
• +18 dBm Psat typ.
• Wide operating DC voltage, +10 to +15 V
• DC protected against over-voltage, reverse-voltage conditions

KM-35F+

• Coaxial RF Adapter
• Ultra-wideband, DC to 33 GHz
• Low insertion loss, 0.09 dB Typ.
• Excellent VSWR, 1.04:1 Typ.
• Flat response

HFCG-4000+

• High Pass Filter
• Low loss, 0.8 dB typ.
• Return loss, 12 dB typ.
• Stop Band Rejection, 42 dB typ.
• Small size 2.0 mm x 1.25 mm

HFCG-2200+

• High Pass Filter
• Low loss, 0.8 dB typ.
• Return loss, 11 dB typ.
• Stop Band Rejection, 49 dB typ.
• Small size 2.0 mm x 1.25 mm

K2-UNAT-A+

• Fixed Attenuators Kit
• Wideband, 50Ω
• 1 to 10, 15, 20, 30 dB attenuation
• Type-N male & female connectors
• Rugged Unibody construction
• Small size 2.1”
• Very low cost

K3-VAT-A+

• Fixed Attenuators Kit
• Wideband, 50Ω
• Input power up to 2W Max
• 3, 6 and 10 dB attenuation
• SMA Male and Female connectors
• Excellent VSWR, 1.20:1 to 1.40:1 typ.
• Excellent flatness, 0.30 to 0.45 typ.
• Length less than 1.5”

K2-VAT-A+

• Fixed Attenuators Kit
• Wideband, 50Ω
• Input power up to 2W Max
• 1 to 10 dB attenuation
• SMA Male and Female connectors
• Excellent VSWR, 1.20:1 to 1.45:1 typ.
• Excellent flatness, 0.25 to 0.45 typ.
• Length less than 1.5”

K1-VAT-A+

• Fixed Attenuators Kit
• Wideband, 50Ω
• Input power up to 2W Max
• 3, 6, 10, 20, 30 dB attenuation
• SMA Male and Female connectors
• Excellent flatness, 0.30 to 1.30 dB typ.
• Length less than 1.5”

K1-UNAT-A+

• Fixed Attenuators Kit
• Wideband, 50Ω
• 3, 6, 10, 15, 20 dB attenuation
• Type-N male & female connectors
• Rugged Unibody construction
• Small size 2.1”
• Very low cost

TPHK-3002+

• LTCC Thru-Line
• Low loss, less than 1 dB max at 20 GHz
• Return loss, 14 dB typical below 20 GHz
• Standard 1812 (4.5mm x 3.2mm) case style
• Suited for very high-volume production

CY3-453-DG+

• 3X Die Multiplier
• Ultra-wideband, output from 20 to 45 GHz
• Wide input power range, +12 to +17 dBm
• Low conversion loss, 20 dB typ.
• Good fundamental and harmonic suppression: F1 > +40 dBc; F2 > +25 dBc; F4 > +35 dBc.

ZVBP-4450-S+

• Cavity Band Pass Filter
• Low Insertion loss, 0.3dB typ.
• Good Return loss, 25dB typ.
• Great Rejection (50 to 100 dB typ.)
• Wide stopband up to 15000 MHz

ZVBP-3420-S+

• Cavity Band Pass Filter
• Low Insertion loss, 1.5dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 6000 MHz

ZVBP-3300-S+

• Cavity Band Pass Filter
• Low Insertion loss, 0.6dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 8000 MHz

ZVBP-3260-S+

• Cavity Band Pass Filter
• Low Insertion loss, 1.7dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 7000 MHz

ZVBP-3100-S+

• Cavity Band Pass Filter
• Low Insertion loss, 1.5dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 7000 MHz

ZVBP-2940-S+

• Cavity Band Pass Filter
• Low Insertion loss, 1.4dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 6000 MHz

ZVBP-2780-S+

• Cavity Band Pass Filter
• Low Insertion loss, 1.4dB typ.
• Good Return loss, 20dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 6000 MHz

ZVBP-11R175G-S+

• Cavity Band Pass Filter
• Low insertion loss, 0.4 dB typ.
• Good return loss, 18 dB typ.
• Great Rejection (40 to 100 dB typ.)
• Stopband up to 26500 MHz

ZT-349

• Adapter Patch Panel
• Convenient panel-mounted design
• Excellent VSWR
• Flat frequency response

ZT-257

• Splitter/Combiner Panel
• 4 x 4-way passive splitter / combiners
• Convenient panel-mounted design
• Wide bandwidth
• High power handling

ZT-183

• Adapter Patch Panel
• Convenient panel-mounted design
• Excellent VSWR
• Flat frequency response

ZT-182

• Adapter Patch Panel
• Convenient panel-mounted design
• Excellent VSWR
• Flat frequency response

ZT-96KFFL-KF50+

• Adapter Patch Panel
• Convenient panel-mounted design
• Excellent VSWR
• Flat frequency response

RC-3MTS-50

• mmWave Switch Matrix
• Millimeter wave switching (up to 50 GHz)
• 3 x mechanical transfer / DPDT switches
• Ethernet & USB control
• High reliability, 2 million switch cycles

RC-2MTS-50

• mmWave Switch Matrix
• Millimeter wave switching (up to 50 GHz)
• 2 x mechanical transfer / DPDT switches
• Ethernet & USB control
• High reliability, 2 million switch cycles

RC-2MTS-12N

• RF Mechanical Switch
• High reliability mechanical switches
• 2 x mechanical transfer / DPDT switches
• N-type connectors
• Ethernet & USB control

SCG-3-752+

• 3 Ways LTCC Power Splitter
• Isolation resistor, external 150 ohms
• Low insertion loss, 1.3 dB typ.
• Excellent phase unbalance, 5 deg. typ.
• Wrap around terminations for excellent solderability

LFCV-1552+

• LTCC Low Pass Filter
• Low loss, 0.9 dB typical
• Return loss, 15 dB typical
• Stop Band Rejection 36 dB typical
• Small size 1210 (0.126" x 0.098" x 0.037")

LFCW-1292+

• LTCC Low Pass Filter
• Low loss, 1.3 dB typ.
• Good rejection 45 dB typ
• Stop Band Rejection, 36 dB typ.
• Small size 0603 (0.063" x 0.032" x 0.024")

HFCW-8400+

• LTCC High Pass Filter
• Low loss, 0.9 dB typ.
• Return loss, 11 dB typ.
• Stop Band Rejection, 36 dB typ.
• Small size 0603 (0.063" x 0.032" x 0.024")

HFCW-6600+

• LTCC High Pass Filter
• Low loss, 1 dB typ.
• Return loss, 9 dB typ.
• Stop Band Rejection 44 dB typ.
• Small size 0603 (0.063" x 0.032" x 0.024")

HFCW-133+

• LTCC High Pass Filter
• Good rejection, 38 dB typ.
• Tiny size, 0603 (0.063" X 0.032" X 0.024")
• Good power handling, 2.5W

HFCW-1042+

• LTCC High Pass Filter
• Good rejection, 34 dB typ.
• Tiny size, 0603 (0.063" X 0.032" X 0.024")
• Good power handling, 2.5W

FX-30GHP-RC

• Sig Gen Frequency Extender
• For SSG-15G-RC
• Multiply 15 GHz signal source to 30 GHz
• Buffer input signals for +28 dBm output level
• Integrates seamlessly with SSG-15G-RC signal generator
• USB and Ethernet control

ZN2PD-4R753+

• Coaxial High Power
• Splitter/Combiner
• Wide frequency band, 450 to 7500 MHz
• Power handling up to 30W
• Low insertion loss, 0.6 dB typ.
• Low amplitude unbalance 0.02 dB typ.
• High isolation, up to 28 dB typ.

SMIQ-653H-DG+

• MMIC IQ
• Mixer Die
• Wideband RF & LO, 18 to 65 GHz
• Wideband IF, DC to 20 GHz
• High L-R Isolation, 40 dB typ. at 40 GHz
• High Input IP3, +23 dBm typ.
• Useable as Up & Down Converter

ZVA-183WA-S+

• Coaxial Medium Power Amplifier
• Wideband 100 MHz to 18 GHz
• 30dBm P_SAT typical
• Excellent Gain Flatness, ±1.5dB typical
• Low Noise Figure, 4 dB typical
• Over-Voltage & Reverse Voltage Protection

RFE-24M30M075X+

• Coaxial High Power Amplifier
• One input, four 19W outputs
• 27 MHz ISM band
• Suitable for CW and pulsed signals
• High gain, 16 dB typical at P_SAT
• 55% typical efficiency
• Integrated harmonic suppression

ZX76-44G-30-K+

• Coaxial Wideband
• Digital Step Attenuator
• Wideband, operates up to 43.5 GHz
• Immune to latch up
• High IIP3, +50 dBm
• Good VSWR, 1.5:1 typ.
• Dual or Single supply voltage: Vdd=+3.3V

ZMDB-653H-E+

• Coaxial Wideband
• Frequency Mixer
• Super Wideband RF & LO, 20 to 65 GHz
• Excellent input IP3, +20 dBm typ.
• Excellent IF bandwidth, DC to 20 GHz
• High L-R isolation, 45 dB typ.
• Usable as Up & Down Converter

ZEQ-10-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 9.4 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-9-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 8.4 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-8-44K+

• Coaxial
• Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 7.4 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches
• Power Handling of +27 dBm

ZEQ-7-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 6.5 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-6-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 6 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-5-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 4.7 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-4-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 3.6 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical
• Small form-factor 0.56 x 0.56 inches

ZEQ-3-44K+

• Coaxial Broadband Slope Equalizer
• Wide band operation, DC to 40 GHz
• Negative insertion loss slope of 3.1 dB typ. (other slope values available)
• Internally matched to 50 Ohm
• Minimal slope deviation of ±0.4 dB typical

EQY-18-24+

• MMIC Surface Mount
• Gain Equalizer
• 18 dB Slope
• Insertion Loss, 20.4 dB Typ. at 6 GHz
• Insertion Loss, 2.2 dB Typ. at 18 GHz
• Return Loss, 20 dB Typ.
• Small Package 3 x 3 mm MCLP

ZUDC30-06183-S+

• Wideband, DC Pass
• Directional Coupler
• Wide frequency range, 6 to 18 GHz
• Excellent coupling flatness, ±0.3 dB typ.
• Good directivity, 21 dB typ. at 12 GHz

RDC-20-252-5WX+

• Surface Mount, Top-Hat
• Directional Coupler
• Wideband 30-2500 MHz
• Low mainline loss, 0.6 dB typ. at 2000 MHz
• Good Directivity, 16 dB typ.
• Good Return Loss, 22 dB typ.

TCM2-672AX+

• Surface Mount, Top-Hat
• RF Transformer
• Wideband, 1500 to 6700 MHz
• Balanced transmission line
• Low insertion loss 0.8 dB at 4 GHz
• Flat insertion loss, 0.6 dB typ.
• Good input return loss, 15 dB typ.
• Low phase and amplitude unbalance, 6°, 0.8 dB at 4 GHz

TCM1-382WX+

• Surface Mount, Top-Hat
• RF Transformer
• Wideband, 0.2 to 3800 MHz
• Flat response, ±0.6 dB insertion loss over full band
• Protected by US Patent 9,071,229B1
• Low phase and amplitude unbalance, 6°, 0.8 dB

TCM2-452AX+

• Surface Mount, Top-Hat
• RF Transformer
• Wideband, 1000 to 4500 MHz
• Balanced transmission line
• Low insertion loss 0.6 dB
• Flat insertion loss, 0.6 dB typ.
• Good input return loss, 15 dB typ.
• Low phase and amplitude unbalance, 6°, 0.8 dB

SYBDC-20-61WHP+

• Surface Mount
• Bi-Directional Coupler
• High power handling, up to 80W
• Low mainline loss, 0.15 dB typ.
• High directivity, 20 dB typ.
• Excellent VSWR, 1.12:1 typ

RDC-16-182-75+

• Surface Mount
• Directional Coupler
• Low mainline loss, 1.10 dB typ. at 1218 MHz
• Good return loss, 18 dB typ.
• Excellent coupling flatness, ±0.3 dB
• Supports DOCSIS® 3.1 and 4.0 Systems

ZVA-183A-S+

• Coaxial Wideband
• Medium Power Amplifier
• Wideband 700 MHz to 18 GHz
• Output Power 0.5 watt, at Saturation
• Excellent Gain Flatness, ±1.5dB typ. from 700 MHz to 18 GHz
• Over-Voltage & Reverse Voltage Protection
• Single Supply Voltage of +12 VDC

ZHL6G018G020+

• Coaxial Wideband
• High Power Amplifier
• High output power, 20W
• 6 to 18 GHz ultra broadband
• Suitable for modulated, CW, and pulsed signals
• High power gain, 40 dB typical
• No damage with VSWR of 3:1

ZHL0G60G7100+

• Coaxial Wideband
• High Power Amplifier
• Saturated power, 100 W typ.
• Wide bandwidth, 600 to 700 MHz
• High gain, 51 dB typ.
• Self-protected from overheating and reverse polarity
• Self-protected against too much reflected power
• Self-protected against too much forward power

ZHL2G02G4125X+

• Coaxial Wideband
• High Power Amplifier
• Saturated power, 125W typ.
• Wide bandwidth, 2000 to 2400 MHz
• High gain, 51 dB typ.
• Self-protected from overheating and reverse polarity
• Self-protected against too much reflected power

ZHL-20W-83X-S+

• Coaxial Wideband
• High Power Amplifier
• Saturated power, 20W typ.
• Wide bandwidth, 4000 to 8000 MHz
• High gain, 56 dB typ.
• Self-protected from overheating, reverse polarity and DC shorting/unshorting

ZVA-71863HPX+

• Coaxial
• High Power Amplifier
• High gain 38 dB typ. over the entire operating band
• Excellent gain flatness, ±1.5 dB typ.
• High Psat = 24 dBm typ.
• Adjustable DC voltage, +10 to +15 V

ZVA-71863LNX+

• Coaxial
• High Power Amplifier
• High gain, 37 dB typ.
• Excellent gain flatness, ±1.75 dB typ.
• Low noise figure = 4.5 dB typ. from 71 to 81 GHz
• Adjustable single supply voltage, +10 to +15V

ZVA-35703X+

• Coaxial
• High Power Amplifier
• High gain 17.5 dB typ. over the entire operating band
• Excellent gain flatness, ±1.5 dB typ.
• High Psat = 21 dBm typ.
• Adjustable DC voltage, +10 to +15V

ZVA-50953X+

• Coaxial Wideband
• High Power Amplifier
• Exceptionally high frequency
• Flat gain response over a wideband
• Operates with a single DC supply of +10V to +15V
• Over voltage and reverse voltage protected

ZVA-543X+

• Coaxial Wideband High Power Amplifier
• High gain, 34 dB typ. over the entire operating band
• Good gain flatness, ±2.0 dB typ.
• High saturated output power, +27 dBm typ.
• Adjustable DC voltage, +10 to +15V

ZVA-543HPX+

• Coaxial Wideband
• High Power Amplifier
• High gain, 31 dB typ. over the entire operating band
• Good gain flatness, ±2.0 dB typ.
• +29 dBm Psat Typ.
• Adjustable DC voltage, +10 to +15V
• DC protected against over-voltage, reverse-voltage conditions

ZVA-183WAX-S+

• Coaxial Wideband
• High Power Amplifier
• Wideband 100 MHz to 18 GHz
• 30dBm Psat typical
• Excellent Gain Flatness, ±1.5dB typical
• Low Noise Figure, 4 dB typical
• Over-Voltage & Reverse Voltage Protection

WR28-KFR+

• Waveguide to Coaxial
• Adapter
• Ka-Band frequency range, 26.5 to 40 GHz
• Excellent VSWR, 1.2:1 typ.
• Low insertion loss, 0.15dB typ.
• Compact design
• UG-599/U waveguide cover flange
• 2.92mm-F connector

WR22-VFR+

• Waveguide to Coaxial
• Adapter
• Q-band frequency range, 33 to 50 GHz
• Excellent VSWR, 1.2:1 typ.
• Low insertion loss, 0.25dB typ.
• Compact design
• UG383/U waveguide cover flange
• 2.4mm-F connector

ZVA-213A-S+

• Coaxial Wideband
• Medium Power Amplifier
• Wideband 800 MHz to 21 GHz
• Output Power 0.5 watt, at Saturation
• Excellent Gain Flatness, ±1.5dB typ. from 800 MHz to 21 GHz
• Over-Voltage & Reverse Voltage Protection
• Single Supply Voltage of +12 VDC

ZVA-1W-103+

• Medium Power, High Gain
• Wideband Amplifier
• High gain 39 dB typ.
• Good gain flatness, ±1.5 dB typ.
• Output power 1.5W typ. at saturation
• Low noise figure, 4 dB typ.

ZVA-1W-103+

• Medium Power, High Gain
• Wideband Amplifier
• High gain 39 dB typ.
• Good gain flatness, ±1.5 dB typ.
• Output power 1.5W typ. at saturation
• Low noise figure, 4 dB typ.

ZVE-453HP+

• Medium Power, High Gain
• Wideband Amplifier
• High gain 39 dB typ. over the entire operating band
• Excellent gain flatness, ±2.5 dB typ.
• Saturated output power = +31 dBm typ.
• Adjustable DC voltage, +10 to +15 V

ZVE-453G+

• Medium Power, High Gain
• Wideband Amplifier
• High gain 41 dB typ. over the entire operating band
• Excellent gain flatness, ±3 dB typ.
• Saturated output power = +28 dBm typ.
• Adjustable DC voltage, +10 to +15 V

ZVE-453+

• Medium Power, High Gain
• Wideband Amplifier
• High gain 33 dB typ. over the entire operating band
• Excellent gain flatness, ±2.5 dB typ.
• Saturated output power = +29 dBm typ
• Adjustable DC voltage, +10 to +15 V

UDAT-67G-60

• USB /DAISY-CHAIN
• Programmable Attenuator
• Super wide bandwidth, solid-state design
• High power handling (+26 dBm CW)
• Daisy-chain control of up to 25 units
• USB control and automation
• Display of attenuation state on unit

USB-1SP8T-183SP

• Solid State
• USB RF SP8T Switch
• Super wide bandwidth, solid-state design
• High isolation, 65 dB @ 18 GHz
• Daisy-chain control of up to 25 switches
• SMP snap-on RF connectors

UDAT-67G-30

• USB /DAISY-CHAIN
• Programmable Attenuator
• Super wide bandwidth, solid-state design
• High power handling (+26 dBm CW)
• Daisy-chain control of up to 25 units
• USB control and automation
• Display of attenuation state on unit

PWR-8PW-RC

• USB / ETHERNET | PEAK & AVERAGE
• Smart Power Sensor
• Peak, average, crest factor & duty cycle measurements
• Modulated, pulsed & CW signal types
• Wide dynamic range, -60 to +20 dBm
• 30 MHz video bandwidth
• 20 million samples / sec
• USB and Ethernet control

EDC14-553-D+

• MMIC DIE
• Directional Coupler
• Wide Bandwidth, 22 to 55 GHz
• Coupling Flatness ±1.0 dB typ. over 22 to 55 GHz
• Nominal Coupling 13.5 dB typ. over 22 to 55 GHz
• Low Insertion Loss 0.8dB typ.
• DC Passing

AVA-054-D+

• MMIC DIE
• Wideband Amplifier
• Wideband, DC to 50 GHz
• Gain Flatness, ±2.2 dB
• Typical P1dB, +19 dBm
• May be used as a replacement model for MAAM-011109-DIE

AVA-183MP-D+

• MMIC DIE
• Wideband Amplifier
• Wideband, DC to 18 GHz
• P1dB, +23.2 dBm Typ. at 10 GHz
• OIP3, +29.5 dBm Typ. at 10 GHz
• Reverse Isolation, 27 dB Typ.

AVA-2183-D+

• MMIC DIE
• Wideband Amplifier
• Wideband, 2 to 18 GHz
• Flat Gain 16.6±0.7 dB from 2 to 18 GHz
• P1dB, +19.6 dBm Typ. at 10 GHz
• OIP3, +27.4 dBm Typ. at 10 GHz

AVA-5R183-D+

• MMIC DIE
• Wideband Amplifier
• Wideband, 0.5 to 18 GHz
• Excellent Gain Flatness, ±1.6 dB Typ. up to 18 GHz
• P1dB, +19.6 dBm Typ. at 10 GHz
• +18 dBm Typ. P1dB

eVNA-63+

• Vector Network Analyzer
• 2-port, 300 kHz to 6 GHz s-parameter measurements
• -50 dBm to +10 dBm variable port power
• Integrated Bias-Tee
• Standard Time Domain Analysis with Gating

SG-30G-RC

• Millimeter wave | USB & Ethernet
• Wideband Signal Generator
• Millimeter wave signal source
• High output power @ 30 GHz
• Pulse modulation with 0.5 µs pulse width

FX-30G-RC

• Millimeter Wave / USB & Ethernet
• Frequency Extender
• Multiply 15 GHz signal source to 30 GHz
• Buffer input signals for +20 dBm output level
• Integrates seamlessly with SSG-15G-RC signal generator

PWR-40PW-RC

• USB / Ethernet Peak & Average
• Smart Power Sensor
• Peak, average, crest factor & duty cycle measurements
• High isolation, 30 dB @ 67 GHz
• Modulated, pulsed & CW signal types
• 30 MHz video bandwidth
• 20 million samples / sec

USB-1SP2T-673

• Solid State
• USB RF SP2T Switch
• Super wide bandwidth, solid-state design
• High isolation, 30 dB @ 67 GHz
• USB control and automation
• Daisy-chain control of up to 25 switches
• LED indicator on active port

USB-1SP8T-34

• Solid State
• USB RF SP8T Switch
• Super wide bandwidth, solid-state design
• High isolation, 60 dB @ 30 GHz
• USB control and automation
• Daisy-chain control of up to 25 switches

USB-1SP4T-34

• Solid State
• USB RF SPDT Switch
• Super wide bandwidth, solid-state design
• High isolation, 60 dB @ 30 GHz
• USB control and automation
• Daisy-chain control of up to 25 switches

USB-1SP2T-34

• Solid State
• USB RF SPDT Switch
• Super wide bandwidth, solid-state design
• High isolation, 50 dB @ 30 GHz
• USB control and automation
• Daisy-chain control of up to 25 switches

ZX76-50G-30-V+

• Coaxial Wideband
• Digital Step Attenuator
• Wideband, 100 MHz to 50 GHz
• Immune to latchup
• High IIP3, 50 dBm
• Low Insertion Loss
• Good VSWR, 1.5:1 Typ
• Glitch-less attenuation transitions
• Dual or Single supply voltage: Vdd=+3.3V

ZVE-373LN-K+

• Super Ultra
• Wideband Amplifier
• Extremely wideband, 28 to 37 GHz
• Flat Gain, 20±1.5 dB typ.
• High OIP3, +20 dBm typ.
• +9 dBm Pout typ.

ZVA-02303HP+

• Medium Power, High Gain Wideband Amplifier
• 0.5 to 30 GHz
• High Gain of 38 dB typ.
• Excellent Gain flatness, ±1 dB typ.
• Saturated Output Power, +28 dBm typ.
• Available with and without heatsink

ZVA-0.5W303G+

• Coaxial, Wideband
• Medium Power Amplifier
• Wideband 10 MHz to 30 GHz
• Output Power 0.5 watt, at Saturation
• Excellent Gain Flatness, ±1.5 dB typ. from 100 MHz to 26.5 GHz
• Low Noise Figure, 4.2 dB typ. from 1 to 26.5 GHz

ZVA-18403G+

• Low Noise, High Gain Wideband Amplifier
• Wideband 18 to 40 GHz
• Extremely Low NOise Figure of 3.8 dB typ. through Ka-Band
• High Gain of 43 dB typ
• Output Power, +23 dBm (200 mW)
• Operates with a single DC supply of +9 to +15 V

K1-LFCN-MMW+

• Low Pass Filter Designer’s Kit
• DC to 30.5 GHz
• LTCC Low Pass Filters at mm-wave frequency
• Perfectly suited for WiFi, Bluetooth, Zigbee Applications
• Small size, 1206
• Excellent power handling, up to 1 Watt
• Low cost

K1-DCW+

• Directional Couplers Designer’s Kit
• 1.2 to 7.2 GHz
• Perfectly suited for WiFi, Bluetooth, Zigbee Applications
• Small size, 0603
• Rugged LTCC construction
• Excellent Power Handling, up to 2 Watts
• Low cost

MDB-54H+

• MMIC, Surface Mount
• Wideband Double Balanced Mixer
• Super wideband RF & LO, 20-50 GHz
• Super wideband IF, DC-20 GHz
• High L-R Isolation, 45 dB typ.
• Usable as Up & Down Converter